InSinkErator Involve HC-View Specifications - Page 1

InSinkErator Involve HC-View Manual

Page 1 highlights

Instant Hot Water Dispensers The Next Necessity™ HC-View-SS Graceful, clean, transitional design dispenses instant near-boiling 200°F and cool drinking water Dimensions Minimum 2-5/8" required from sink hole center to backsplash Water Supply Inlet Tube Flexible Outlet Tube Flexible Vent Tube Submittal Sheet • Hot & Cool - Dispenses near-boiling 200°F and cool drinking water • Durable all metal construction • 35% more near-boiling water from larger 2/3-gallon stainless steel tank • Easy to adjust temperature control • Tool-free tank connections and dry start protection to ease installation • Provides 60 cups/hr of near-boiling water • Fits countertops up to 3" thick • 3-Year We Come To You® In-Home Service Warranty* • 115 volts, 750 watts, 6.25 amps • Available in these designer finishes: chrome and satin nickel Sample Specification Instant hot water dispenser(s) shall be InSinkErator Model HC-View-SS with 2/3-gallon stainless steel tank, adjustable temperature from 150°F to 210°F and instant, self-closing hot valve. Warranty: 3-year parts and in-home service. * The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit. US Pat. D532,497 (tank enclosure) Specifications Capacity Electrical 2/3-gallon stainless steel tank dispenses 60 cups of 200˚F water per hour 115 volts A.C., 750 watts, 6.25 amp heating element with grounded three (3) prong plug Thermostat Snap-action, adjustable from 150˚F to 210˚F (factory pre-set at 200˚F) Insulation Hot Valve Meets U.L. 94HF-1 flammability specification Instant, self-closing Cold Valve Instant, self-closing Recommended 30-125 psi Supply Pressure Shipping Weight Approximately 8.5 lbs. Required Hole Diameter 1 -1/2" standard sink hole HWD391-11F-45-02 Complies with Lead Plumbing Law 1-800-558-5700 www.insinkerator.com Printed in USA The Emerson logo is a trademark and service mark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right ot change or discontinue models. © 2011 InSinkErator, a division of Emerson Electric Co. All Rights Reserved.

  • 1

Minimum 2-5/8" required
from sink hole center
to backsplash
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
The Next
Necessity
Submittal Sheet
Specifications
Graceful, clean, transitional design dispenses
instant near-boiling 200°F and cool drinking water
Instant Hot Water Dispensers
HC-View-SS
Sample Specification
HWD391-11F-45-02
Hot & Cool
– Dispenses near-boiling
200°F and cool drinking water
• Durable all metal construction
• 35% more near-boiling water from larger
2/3-gallon stainless steel tank
• Easy to adjust temperature control
• Tool-free tank connections and dry start
protection to ease installation
• Provides 60 cups/hr of near-boiling water
• Fits countertops up to 3” thick
• 3-Year
In-Home
Service Warranty*
• 115 volts, 750 watts, 6.25 amps
Available in these designer finishes:
chrome and satin nickel
Instant hot water dispenser(s) shall be
InSinkErator Model HC-View-SS with
2/3-gallon stainless steel tank, adjustable
temperature from 150°F to 210°F and
instant, self-closing hot valve.
Warranty:
3-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
US Pat. D532,497 (tank enclosure)
Capacity
2/3-gallon stainless
steel tank dispenses
60 cups of 200˚F
water per hour
115 volts A.C., 750
watts, 6.25 amp
heating element
with grounded
three (3) prong plug
Hot Valve
Instant, self-closing
Cold Valve
Instant, self-closing
Recommended
Supply Pressure
30-125 psi
Required
Hole Diameter
Electrical
Snap-action,
adjustable from
150˚F to 210˚F
(factory pre-set
at 200˚F)
Thermostat
Meets U.L. 94HF-1
flammability
specification
Insulation
Shipping Weight
Approximately
8.5 lbs.
1 -1/2" standard
sink hole
Printed in USA
1-800-558-5700
www.insinkerator.com
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
InSinkErator may make improvements and/or
changes in the specifications at any time, in its sole
discretion, without notice or obligation and further
reserves the right ot change or discontinue models.
© 2011 InSinkErator, a division of
Emerson Electric Co. All Rights Reserved.
Complies with Lead Plumbing Law
We Come To You
®
Dimensions