Icom VE-PG4 Usb Driver Installation Guide - Page 3

3. INSTALLING THE DRIVER NOTE: •• NEVER connect the USB cable between the network device and the PC until the USB driver has been installed. Disconnect the cable, if connected, before starting the USB driver installation. •• This USB driver does not support the automatic recognition system. LLThe displayed dialog, indications, or operations may differ slightly from the following instructions, depending on your system version and settings. 6. Windows starts installing the driver. 1. Log on the PC as the administrator. Confirm that the network device and PC are not connected, and no other application is running. 2. Extract the downloaded USB driver, and then open the folder that contains the installer. 3. Double-click the following file: •• For the 32 bit version OS: CP210xVCPInstaller_x86.exe •• For the 64 bit version OS: CP210xVCPInstaller_x64.exe 7. After the installation has completed, click . Double-click 4. When the "User Account Control" dialog is displayed, click . 5. When the install screen is displayed, click . Click (☞ Continued on the next page) Click •• If the "License Agreement" dialog is displayed, read the agreement, and then select "I accept this agreement," and then click >. 3