Icom IP100H Instruction Manual - Page 1
Icom IP100H Manual
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
INSTRUCTIONS IP ADVANCED RADIO SYSTEM REMOTE COMMUNICATOR IP100FS The IP100FS ip advanced radio system remote communicator allows you to remotely communicate with WLAN transceivers connected to your IP1000C from a PC through IP networks. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the IP100FS. SAVE THESE INSTRUCTIONS - These instructions contain important safety and operating instructions for the IP100FS. EXPLICIT DEFINITIONS WORD RWARNING! CAUTION NOTE DEFINITION Personal injury, fire hazard or electric shock may occur. Equipment damage may occur. If disregarded, inconvenience only. No risk of personal injury, fire or electric shock. PRECAUTIONS R WARNING! NEVER disassemble, modify or repair the IP100FS USB flash drive. This may result in an electrical shock, cause a fire or damage the drive. R WARNING! NEVER operate or touch the IP100FS USB flash drive with wet hands. This may result in an electrical shock or damage the drive. OPERATION NOTE • Ensure that your PC supports USB port(s) operation by confirming the Universal Serial Bus controller is in the PC's Device Manager. • W e recommend that you insert the IP100FS USB flash drive to the PC's USB port. Connecting it through a hub may damage the drive or make it work improperly. • W hen operating the PC or external devices, see their instruction manuals for operational details. INSTALLATION NOTE The displayed dialogue boxes, indications or operations may differ slightly, depending on your system settings, type of OS and its service pack* level. * In this leaflet, service pack is written as SP from further on. CAUTION: DO NOT place the IP100FS USB flash drive in direct sunlight. This could damage the IP100FS drive. CAUTION: DO NOT use harsh solvents such as benzine or alcohol to clean the IP100FS USB flash drive, as they can damage the drive's surfaces. If the USB flash drive becomes dusty or dirty, wipe it clean with a dry, soft cloth. Always place the IP100FS USB flash drive in a secure place to avoid inadvertent use by children. FCC INFORMATION CAUTION: Any changes or modifications not expressly approved by Icom Inc., could void your authority to operate the equipment under FCC regulations. FOR CLASS B UNINTENTIONAL RADIATORS: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and re- ceiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 1. BEFORE STARTING THE IP100FS Follow the instructions and install the IP100FS dispatching software. The IP100FS USB flash drive must also be inserted into the PC every time you start up the IP100FS dispatching software. • To operate the software, refer to the IP100FS Help file. • Purchase a speaker, headset or a microphone (See options below) to meet your needs. ■■System requirements (As of January 2015) DDPC CPU Clock Intel® Core™2 Duo Processor E6600/2.40 GHz, equivalent or faster System memory... 2 GB or more Monitor Full HD (1920 x 1080) recom- mended At least XGA (1024 x 768) Sound card.......... For sounding alarms Speaker For sounding alarms LAN 100BASE-TX or faster Other: USB 1.1 or 2.0 Hard disk At least 1 GB of free space. NOTE: DO NOT install more than 2 LAN cards in the PC. DDOperating System Microsoft® Windows® 8.1 Microsoft® Windows® 8 Microsoft® Windows® 7 (SP1 or later) Microsoft® Windows Vista® (SP2 or later) • T he IP100FS can be used with both 32 and 64 bit versions of the operating systems listed above. • Except for "RT" versions of Microsoft® Windows® 8.1 or Microsoft® Windows® 8. ■■USB flash drive and its files The USB drive contains the IP100FS and its installer. USB flash drive • "REMOVABLE" and "CD Drive ICOM" windows appear when the USB flash drive is attached to the PC. DO NOT restart or shutdown the PC with the USB flash drive attached to it. This may be the cause of data loss and malfunctions. ALWAYS remove the flash drive from the PC before restarting or shutting down the PC. ■■PC Standby mode Depending on the PC, the software may not operate properly after returning from the standby mode. If this occurs, turn OFF your PC's standby mode. ■■Options SM-26*1 desktop microphone CT-23*2 ptt microphone adapter HM-152 hand microphone *1 When using with the IP100FS, the MONITOR switch is disabled. *2 CT-23 is necessary when you connect the SM-26 and the PC. Note on the CT-23: • T he CT-23 audio communication contains a high pitched tone that most people cannot hear. However, if you do hear it, lower the PC's audio volume. • If the booster, amplifier or filtering function is set in the microphone interface of the PC, deactivate them. • If the microphone's PTT malfunction occurs, adjust the microphone recording level properly. ■■About the firewall setting The IP100FS communication may be blocked by your firewall. In that case, a protocol and port numbers listed below should be allowed to pass the firewall. See your firewall instructions for the correct settings. Protocol: UDP Port number: Source Port Number* → Server Port Number* Source Port Number* ← Server Port Number* Source Port Number* ← Dynamic port * Refer to the port numbers set in the site settings of the IP100FS. (→ Menu Bar > Option > Setting... ) About the IP100FS Help file: Please refer to the Help file of the software for assistance with the functions or settings. To open the Help file, click "Help" in the Menu Bar of the software and select "Help," or simply push the [F1] key on the PC's keyboard.