Icom IP100H Instruction Manual

System requirements

■

(As of January 2015)

PC

D

CPU Clock

...........

Intel

®

Core™2 Duo Processor

E6600/2.40 GHz, equivalent or

faster

System memory ..2 GB or more

Monitor

................

Full HD (1920 x 1080) recom-

mended

At least XGA (1024 x 768)

Sound card

..........

For sounding alarms

Speaker

...............

For sounding alarms

LAN

.....................

100BASE-TX or faster

Other:

USB 1.1 or 2.0

Hard disk

.............

At least 1 GB of free space.

NOTE:

DO NOT

install more than 2 LAN cards in the PC.

Operating System

D

Microsoft

®

Windows

®

8.1

Microsoft

®

Windows

®

8

Microsoft

®

Windows

®

7 (SP1 or later)

Microsoft

®

Windows Vista

®

(SP2 or later)

• The IP100FS can be used with both 32 and 64 bit ver

-

sions of the operating systems listed above.

• Except for “RT” versions of Microsoft

®

Windows

®

8.1 or

Microsoft

®

Windows

®

8.

USB flash drive and its files

■

The USB drive contains the IP100FS and its installer.

• “REMOVABLE” and “CD Drive ICOM” windows appear

when the USB flash drive is attached to the PC.

DO NOT

restart or shutdown the PC with the USB

flash drive attached to it. This may be the cause of

data loss and malfunctions.

ALWAYS

remove the

flash drive from the PC before restarting or shutting

down the PC.

PC Standby mode

■

Depending on the PC, the software may not operate

properly after returning from the standby mode. If this

occurs, turn OFF your PC’s standby mode.

Options

■

*1 When using with the IP100FS, the MONITOR switch is

disabled.

*2 CT-23 is necessary when you connect the SM-26 and

the PC.

Note on the CT-23:

•

The CT-23 audio communication contains a high

pitched tone that most people cannot hear. Howev-

er, if you do hear it, lower the PC’s audio volume.

•

If the booster, amplifier or filtering function is set

in the microphone interface of the PC, deactivate

them.

•

If the microphone’s PTT malfunction occurs, adjust

the microphone recording level properly.

About the firewall setting

■

The IP100FS communication may be blocked by your

firewall.

In that case, a protocol and port numbers listed below

should be allowed to pass the firewall.

See your firewall instructions for the correct settings.

Protocol

: UDP

Port number

:

Source Port Number*

→

Server Port Number*

Source Port Number*

←

Server Port Number*

Source Port Number*

←

Dynamic port

* Refer to the port numbers set in the site settings of

the IP100FS.

(

→

Menu Bar > Option > Setting... )

R

WARNING! NEVER

disassemble, modify or repair

the IP100FS USB flash drive. This may result in an

electrical shock, cause a fire or damage the drive.

R

WARNING! NEVER

operate or touch the IP100FS

USB flash drive with wet hands. This may result in an

electrical shock or damage the drive.

CAUTION: DO NOT

place the IP100FS USB flash

drive in direct sunlight. This could damage the IP100FS

drive.

CAUTION:

DO NOT

use harsh solvents such as ben

-

zine or alcohol to clean the IP100FS USB flash drive,

as they can damage the drive’s surfaces. If the USB

flash drive becomes dusty or dirty, wipe it clean with a

dry, soft cloth.

Always place the IP100FS USB flash drive in a secure

place to avoid inadvertent use by children.

PRECAUTIONS

INSTRUCTIONS

The IP100FS

IP

ADVANCED

RADIO

SYSTEM

REMOTE

COM

-

MUNICATOR

allows you to remotely communicate with

WLAN transceivers connected to your IP1000C from

a PC through IP networks.

IMPORTANT

READ ALL INSTRUCTIONS

carefully

and completely

before using the IP100FS.

SAVE THESE INSTRUCTIONS

—

These instructions

contain important safety and operating instructions for

the IP100FS.

EXPLICIT DEFINITIONS

WORD

DEFINITION

R

WARNING!

Personal injury, fire hazard or electric

shock may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No risk

of personal injury, fire or electric shock.

IP ADVANCED RADIO SYSTEM

REMOTE COMMUNICATOR

OPERATION NOTE

• Ensure that your PC supports USB port(s) operation by

confirming the Universal Serial Bus controller is in the PC’s

Device Manager.

• We recommend that you insert the IP100FS USB flash

drive to the PC’s USB port. Connecting it through a hub

may damage the drive or make it work improperly.

• When operating the PC or external devices, see their in

-

struction manuals for operational details.

INSTALLATION NOTE

FCC INFORMATION

CAUTION:

Any changes or modifications not expressly ap-

proved by

Icom Inc., could void your authority to operate the

equipment under FCC regulations.

FOR CLASS B UNINTENTIONAL RADIATORS:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reason

-

able protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in ac-

cordance with the instructions, may cause harmful interfer-

ence to radio communications. However, there is no guaran-

tee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and re

-

ceiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

1. BEFORE STARTING THE IP100FS

Follow the instructions and install the IP100FS dispatching software. The IP100FS USB flash drive must

also be inserted into the PC every time you start up the IP100FS dispatching software.

•To operate the software, refer to the IP100FS Help file.

• Purchase a speaker, headset or a microphone (See options below) to meet your needs.

The displayed dialogue boxes, indications or opera

-

tions may differ slightly, depending on your system

settings, type of OS and its service pack* level.

* In this leaflet, service pack is written as SP from further

on.

IP100FS

About the IP100FS Help file:

Please refer to the Help file of the software for assistance

with the functions or settings.

To open the Help file, click “Help” in the Menu Bar of the

software and select “Help,” or simply push the [

F1

] key on

the PC’s keyboard.

USB flash drive

HM-152

HAND

MICROPHONE

SM-26*

1

DESKTOP

MICROPHONE

CT-23*

2

PTT

MICROPHONE

ADAPTER

Icom IP100H Instruction Manual

Icom IP100H Manual

Icom IP100H manual content summary: