Husqvarna 340iBT Owner Manual - Page 11
CAUTION, To start the product, To stop the product, Automatic shutdown function, Functional
View all Husqvarna 340iBT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2. Push the battery into the battery holder of the backpack. The battery locks into position when you hear a click. 3. Push the release buttons on the battery and remove the battery from the product. CAUTION: If the battery does not move easily into the battery holder, the battery is not installed correctly. This can cause damage to the product. 3. Make sure that the battery is installed correctly. To start the product 1. Push the power lever to the start position. 2. Use the power trigger to control the speed. To stop the product 1. Release the power trigger. 2. Push the power lever to the stop position. Automatic shutdown function The product has an automatic shutdown function that stops the product if it is not used. The product shuts down after 30 minutes. Functional behaviour The product can be used with one battery in any of the pockets or with two batteries. If two batteries are installed the product will start to use the battery in the lower pocket before switching to the upper battery. Under normal condition the product will switch to the second battery when the first one is out of power. Under special circumstances the product will switch several times to cool the batteries. If BLi10 or BLi100 is used in the product, the rpm will be limited to protect the batteries. To prevent overheating of the batteries when battery switching is not possible, the product will lower the rpm to ensure full runtime. To operate the cruise control function 1. Push the power trigger to select the optimal airflow for your work. 1166 - 007 - 30.06.2020 11