Husqvarna 122LK Owner Manual - Page 6

Safety devices on the product

Page 6 highlights

• Use a protective helmet where there is a risk of falling objects. bare feet. Put your hair up safely above shoulder level. • Keep first aid equipment close at hand. • Use approved hearing protection that provides adequate noise reduction. Long-term exposure to noise can result in permanent hearing impairment. • Use approved eye protection. If you use a visor, you must also use approved protective goggles. Approved protective goggles must comply with the ANSI Z87.1 standard in the USAs or EN 166 in EU countries. Safety devices on the product WARNING: Read the warning instructions that follow before you use the product. • Do not use a product with defective safety devices. • Do a check of the safety devices regularly. Refer to Maintenance schedule on page 14. • If the safety devices are defective, speak to your Husqvarna servicing dealer. To do a check of the throttle trigger lockout 1. Make sure that the throttle trigger lockout (A) and throttle trigger (B) move freely and that the return spring works correctly. A • Use gloves when necessary, for example when you attach, examine or clean the cutting equipment. B 2. Push down the throttle trigger lockout and make sure that it goes back to its initial position when you release it. • Use sturdy non-slip boots. • Use clothing made of a strong fabric. Always use heavy, long pants and long sleeves. Do not use loose clothing that can catch on twigs and branches. Do not wear jewelry, short pants, sandals or go with 6 1059 - 003 - 30.01.2021

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

Use a protective helmet where there is a risk of
falling objects.
Use approved hearing protection that provides
adequate noise reduction. Long-term exposure to
noise can result in permanent hearing impairment.
Use approved eye protection. If you use a visor, you
must also use approved protective goggles.
Approved protective goggles must comply with the
ANSI Z87.1 standard in the USAs or EN 166 in EU
countries.
Use gloves when necessary, for example when you
attach, examine or clean the cutting equipment.
Use sturdy non-slip boots.
Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, sandals or go with
bare feet. Put your hair up safely above shoulder
level.
Keep first aid equipment close at hand.
Safety devices on the product
WARNING:
Read the warning
instructions that follow before you use the
product.
Do not use a product with defective safety devices.
Do a check of the safety devices regularly. Refer to
Maintenance schedule on page 14
.
If the safety devices are defective, speak to your
Husqvarna servicing dealer.
To do a check of the throttle trigger lockout
1.
Make sure that the throttle trigger lockout (A) and
throttle trigger (B) move freely and that the return
spring works correctly.
A
B
2.
Push down the throttle trigger lockout and make sure
that it goes back to its initial position when you
release it.
6
1059 - 003 - 30.01.2021