Hotpoint RB526DHWW Quick Specs - Page 1

RB526DH Hotpoint® 30" Free-Standing Electric Range Dimensions and Installation Information (in inches) Receptacle Locations Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall. Note: This appliance has been approved for 0" spacing to adjacent surfaces above the cooktop. However, a 6" minimum spacing to surfaces less than 15" above the cooktop and adjacent cabinet is recommended to reduce exposure to steam, grease splatter and heat. " Free-Standing Electric Single Oven Range Installation Information: Before installing, consult installation instructions for c­ urrent dimensional data and additional ension arenqduiirnemsteanltlsa. tion information (in inches) KW Rating 240V 10.1 208V 8.7 Breaker Size 240V 40 Amps† 208V 40 Amps† †Note: Check local codes for required breaker size. 7-1/2 5 7 7-1/2 7/8 10-3/4 2-1/4 3-1/2 REAR WALL 46-3/4 36 to 36-1/2 CENTER LINE 26-1/4 w/o handle 28-3/4 w/handle For answers to your Monogram® or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. 30" Free-Standing Electr Dimension and installation information (in inche 29-7/8 10-3/4 46-3/4 36 to 36-1/2 26-1/4 w/o handle 28-3/4 w/handle 46-3/4 2-1/4 RB525DH, R All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Specification Created 1/14 420407