Hotpoint HTS17BBSLCC Owners Manual - Page 7
About storage drawer and cover removal
![]() |
View all Hotpoint HTS17BBSLCC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support About storage drawer and cover removal. Not all features are on all models. www.Hotpoint.com Adjustable Humidity Drawer (on some models) Slide the control all the way to the HIGH setting to provide high humidity recommended for most vegetables. Slide the control all the way to the LOW setting to provide lower humidity levels recommended for most fruits. Drawer and Cover Removal Drawers can be removed easily by grasping the sides and lifting up slightly while pulling drawers past the stop location. Full-Width Drawer with Plastic Cover To remove the cover, lift it off its supports, pull it forward, tilt it and take it out. Twin Drawers with Glass Cover To remove: 1 Remove the drawers. 2 Reach in, push the front of glass cover up, and at the same time, pull it forward as far as it will come. Tilt it and take it out. Avoid cleaning the cold glass cover with hot water because the extreme temperature difference may cause it to break. 3 Remove the drawer frame. (Always remove the glass cover before you take out the drawer frame.) Lift the frame off the supports at each side and back, pull it forward, tilt it and take it out. To replace: 1 Lower the frame until it rests on the supports at each side and back. 2 Replace the glass cover, pushing its rear edge firmly into the rear frame channel and gently lowering the front into place. 3 Replace the drawers. 7
![](/manual_guide/products/hotpoint-hts16bbs-owners-manual-cb7076f/7.png)