Hotpoint HPS18BTHWW Use and Care Manual - Page 16
Service. - reviews
View all Hotpoint HPS18BTHWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Service. Before you call for service, review the detailed troubleshooting tips in the Owner's manual. If needed, service can be scheduled by visiting us online GEAppliances.com or calling 800.GECARES 800.432.2737. In Canada visit GEAppliances.ca or call 800.561.3344. Truth or Myth Truth or Myth? The automatic ice maker in my refrigerator will produce ice when the refrigerator is plugged in to a power receptacle. Answer MYTH I will never see frost inside the freezer MYTH compartment . Refrigerator door handles can be easily tightened. After starting the ice maker throw away 24 hours of ice production. Door removal is always required for installation. TRUE TRUE MYTH Explanation The refrigerator must be connected to water, and the ice maker must be turned on. Make sure the ice maker is turned on, only after the water line is connected and water is turned on. The ice maker can be turned off by switching it to the OFF position. The freezer must be 15 degrees or colder before the icemaker will produce ice. Please allow at least 24 hours for the refrigerator to pull down and the unit's temperature to stabilize. Frost inside the freezer typically indicates that the door is not properly sealed, or has been left open. If frost is found, clear the frost using a plastic spatula and towel, then check to ensure that no food packages or containers are preventing the freezer door from closing. To help reduce to the potential for frost please make sure there is proper clearance to the air supply and vents in the freezer to improve circulation. Always cover food before loading into the refrigerator, moisture from open containers can add to the frost load. If door handles are loose or have a gap, the handle can be adjusted with set screws located on the ends of the handles. To avoid issues with odor and taste the first batch of ice should be discarded Doors should only be removed when necessary to prevent damage from passage way or access to final location. If doors are removed please review Reversing the Door Swing section for re-hang procedure. There is an adjustment to rear wheels. MYTH Front leveling legs are adjustable and should be used to balance the refrigerator. Leveling legs are used to make initial fresh food door adjustment. There should EHDSSUR[LPDWHO\DóµIDOOIURPWKHIURQWWREDFNWRHQVXUHWKDWWKHGRRUVDOZD\V close. Any All-Purpose cleaner can be used to MYTH clean my refrigerator. All-purpose cleaners are not recommended for use on the refrigerator. Do not use wax, polish, ammonia, bleach, or other products containing chlorine on for any surfaces. Clean with a cloth dampened with soapy water. Dry with a soft cloth. The stainless steel doors can be cleaned with a commercially available stainless steel cleaner. Cleaners with oxalic acid such as Bar Keepers Friend Soft Cleanser™ will remove rust, tarnish and small blemishes. Use only a liquid cleanser free of grit and rub in the direction of the brush lines with a damp soft sponge. Do not use appliance wax or polish on the stainless steel. Gaskets will last longer with regular cleaning and maintenance. TRUE Clean gaskets with warm soapy water. Make sure all folds are clean and dry after cleaning. Make sure flanges are clear of any grit or grime. After cleaning the door gaskets, apply paraffin wax or petroleum jelly to the door gaskets and hinges at the hinge side. This helps keep the gaskets from sticking and bending out of shape. Doors may be shipped with protective TRUE ¿OPWKDWKDVWREHUHPRYHGEHIRUH use. 6PRRWK¿QLVKHGGRRUV6WDLQOHVV6ODWH*ORVV%ODFNDQG*ORVV:KLWHRU6LOYHU 0HWDOOLF ZLOOKDYHDFOHDUSODVWLF¿OPRQWKHGRRUWKDWPXVWEHUHPRYHGDIWHU install. Have more questions? For more information on your refrigerator or other GE appliances please visit www.geappliances.com/videos 16