Honeywell RTH5100 Owner's Manual - Page 20
Check Installer Setup Number 1, Heating
 |
View all Honeywell RTH5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Troubleshooting Tips (Cont) If . . . Then . . . Heating system is running in cool mode. Check Installer Setup Number 1, Heating and/or Cooling System Type, and make sure the setting matches the installed heating and/or cooling system. Refer to Installation Instructions, 69-1716. Heating system does not turn off and the heat temperature setting is set below the room temperature ("Heat On" is not shown in the display). Check Installer Setup Number 1, Heating and/or Cooling System Type, and make sure the setting matches the installed heating and/or cooling system. Refer to Installation Instructions, 69-1716. 69-1722 20
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24
 |
 |
69-1722
20
Heating
system is
running in
cool mode.
Check Installer Setup Number 1, Heating
and/or Cooling System Type, and make
sure the setting matches the installed
heating and/or cooling system. Refer to
Installation Instructions, 69-1716.
Heating
system does
not turn off
and the heat
temperature
setting is set
below the
room
temperature
(³Heat On´ is
not shown in
the display).
Check Installer Setup Number 1, Heating
and/or Cooling System Type, and make
sure the setting matches the installed
heating and/or cooling system. Refer to
Installation Instructions, 69-1716.
Troubleshooting Tips (Cont)
If . . .
Then . . .