Honeywell MK7580-30B41-00 User Guide - Page 42

Start the MetroSet, Locate and open the flash upgrade file. - genesis scanner

Get Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis PDF manuals and user guides View all Honeywell MK7580-30B41-00 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

To upgrade the firmware in the MS7580: 1. Plug the imager into a serial communication port on the host system. 2. Start the MetroSet2 software. 3. Click on the plus sign (+) next to POS Scanners to expand the supported imager list. 4. Choose the MS7580 Genesis from the list. 5. Click on the Configure Genesis/7580 Scanner button. 6. Choose Flash Utility from the options list located on the left side of the screen. 7. Click on the Open File button in the Flash Utility window. 8. Locate and open the flash upgrade file. 9. Select the COM port that the imager is connected to on the host system. 10. Verify the settings listed in the Flash Utility window. 11. Click on the Flash Imager button to begin the flash upgrade. A message will appear on the screen when the upgrade is complete. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
38
To upgrade the firmware in the MS7580:
1.
Plug the imager into a serial communication port on the host system.
2.
Start the MetroSet
2
software
.
3.
Click on the plus sign (+) next to
POS Scanners
to expand the supported
imager list.
4.
Choose the MS7580 Genesis from the list.
5.
Click on the
C
onfigure Genesis/7580 Scanner
button.
6.
Choose
Flash Utility
from the options list located on the left side of the
screen.
7.
Click on the
Open File
button in the Flash Utility window.
8.
Locate and open the flash upgrade file.
9.
Select the COM port that the imager is connected to on the host system.
10. Verify the settings listed in the Flash Utility window.
11. Click on the
Flash Imager
button to begin the flash upgrade. A message
will appear on the screen when the upgrade is complete.