Honeywell 4600GHD051C-0F00E User Guide - Page 54
Scan Stand Mode, LED Power Level
View all Honeywell 4600GHD051C-0F00E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Scan Stand Mode When a unit is in Scan Stand mode, it remains idle as long as it sees the Scan Stand symbol (see below). When a different code is presented, the imager is triggered to read the new code. Note: The imager automatically adjusts the illumination LEDs to the lowest light level possible to maintain a good lock on the Scan Stand symbol. When a symbol is presented, the imager's light levels adjust to the saved setting (see LED Power Level on page 3-10). This mode requires at least 50 lux of ambient light to operate correctly. Scan Stand Mode Scan Stand Symbol When a unit is in Scan Stand mode, the LEDs shine at the Scan Stand symbol on the base of the stand which tells it to remain idle. When the Scan Stand symbol is covered, the imager turns the LEDs on at the configured power level (default setting is high) and attempts to find and decode barcodes in its field of view. Scan Stand Symbol 3 - 6