Hitachi CPX605 User Manual - Page 51
Using the Transition Detector Function, Transition Detector
UPC - 050585150980
View all Hitachi CPX605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
OPTION Menu OPTION Menu (continued) Item SECURITY Description 4. Using the Transition Detector Function While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below. • Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed. • Transition Detector alarm might appear on screen, if the MIRROR setting has been changed. • Keystone adjustment feature has been prohibited as long as the Transition Detector function is ON. 4.1 Turning On the Transition Detector Function 4.1-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the 64#05+6+10&'6'%614 ENTER button to display the Transition Detector on/off menu. Select TURN ON and the current 674010 67401(( angle and mirror setting will be recorded. NOTE: This feature may not function properly if the projector is not in a stable position when TURN ON is selected. Transition Detector on/off menu 4.1-2 If this function is set to TURN ON when the 64#05+6+10&'6'%61410 vertical angle of the projector or mirror setting at which the projector is turned on is different 6JGRTQLGEVQTJCUDGGPVTCPUHGTTGF HTQORTGXKQWUN[KPUVCNNGFRQUKVKQP 2+0$1: +H[QWYKUJVQJCXGCUSWCTGKOCIG than the previously recorded the Transition QPUETGGPCICKP FKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW Detector Alarm will be displayed and the projector will not display the input signal. Transition Detector Alarm If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the power switch was turned off. 4.2 Setting the Transition Detector PASSWORD 4.2-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the ENTER button to display the Transition Detector on/off menu. 4.2-2 Use the ▲/▼ buttons on the Transition 64#05+6+10&'6'%614 Detector on/off menu to select TURN ON. '06'42#55914& The ENTER PASSWORD BOX (small) will be displayed. 37+6 0':6 4.2-3 Use the buttons to enter a ENTER PASSWORD PASSWORD. Move the cursor to the right BOX (small) side of the ENTER PASSWORD BOX 64#05+6+10&'6'%614 (small) and press the ► button to display the %*'%-2#55914& CHECK PASSWORD BOX, enter the same PASSWORD again. 37+6 0':6 4.2-4 Move the cursor to the right side of the CHECK PASSWORD BOX and press the ► button to display the PASSWORD for about 20 seconds, please make note of the PASSWORD during this time. Pressing the ENTER button on the remote control or the INPUT button on the projector will return to the CHECK PASSWORD BOX 64#05+6+10&'6'%614 %1/2.'6' '06'4 ':+6 PASSWORD BOX Transition Detector on/off menu. • Please do not forget your Transition Detector PASSWORD. (continued on next page) 51