Hitachi CPX417 User Manual - Page 74
Phenomena that may be easy to be mistaken for machine defects continued
UPC - 050585151321
View all Hitachi CPX417 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect The signal cables are not correctly connected. Correctly connect the audio cables. Reference page 9 The MUTE function is working. Restore the sound pressing MUTE or VOLUME button on 17 the remote control. The volume is adjusted to an extremely low level. Adjust the volume to a higher level using the menu function 17 or the remote control. Sound does not come out. The AUDIO/SPEAKER setting is not correct. Correctly set the AUDIO/SPEAKER in SETUP menu. The audio on your HDMI equipment is not set to Linear PCM. The HDMI input on this projector supports Linear PCM audio only. Check the audio setting on your HDMI equipment. 36, 37 11 The audio on the HDMI input is muted. Change the audio setting in the AUDIO menu. 37 The digital audio in HDMI signal does not work well. Use the analogue audio, connecting either an RCA audio 9 cable or stereo mini cable. The lens cover is attached. Remove the lens cover. 4, 16 The signal cables are not correctly connected. Correctly connect the connection cables. 9 No pictures are displayed. The brightness is adjusted to an extremely low level. Adjust BRIGHTNESS to a higher level using the menu function. The computer cannot detect the projector as a plug and play monitor. Make sure that the computer can detect a plug and play monitor using another plug and play monitor. 26, 27 11 The BLANK screen is displayed. Press BLANK button on the remote control. 22 (Continued on next page) 74