Hitachi CPX4 User Manual - Page 54
Description, SETUP, ENTER, Dynamic Host, Protocol, IP ADDRESS, SUBNET MASK, DEFAULT, GATEWAY, DNS
![]() |
UPC - 050585151505
View all Hitachi CPX4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
MIU menu MIU menu (continued) Item Description Selecting this item displays the MIU SETUP menu. Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item. DHCP (Dynamic Host Configuration Protocol) SETUP IP ADDRESS SUBNET MASK DEFAULT GATEWAY DNS SERVER (continued on next page) 54 Use the ▲/▼ buttons to turn DHCP on/off. ON OFF Select OFF when the network does not have DHCP enabled. • When the "DHCP" setting changes to "ON", it takes a little time to obtain IP address from DHCP server. • Auto IP function will be assigned an IP address if the projector could not obtain an IP address from server even if DHCP is "ON". Use the buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to OFF. • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network. • The IP ADDRESS "0.0.0.0" is prohibited. Use the buttons to enter the same SUBNET MASK used by your PC. This function can only be used when DHCP is set to OFF. • The SUBNET MASK "0.0.0.0" is prohibited. Use the buttons to enter the DEFAULT GATEWAY (a node on a computer network that serves as an access point to another network) address. This function can only be used when DHCP is set to OFF. Use the buttons to input the DNS server address. The DNS server is a system to control domain names and IP addresses on the Network.
![](/manual_guide/products/hitachi-cpx4-user-manual-b1c860b/54.png)