Hitachi CP-X308 User Manual - Page 213
RS-232C Network Communication
![]() |
View all Hitachi CP-X308 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
RS-232C Network Communication RS-232C Network Communication 1 23 45 67 8 9 1 23 45 67 8 9 CONTROL port of the projector RS-232C cable (cross) - (1) RD (2) TD (3) - (4) GND (5) - (6) RTS (7) CTS (8) - (9) (1) CD (2) RD (3) TD (4) DTR (5) GND (6) DSR (7) RTS (8) DTS (9) RI Connecting the cable RS-232C port of the computer 1. Turn off the projector and the computer. 2. Connect the CONTROL port of the projector with a RS-232C port of WKHFRPSXWHUE\D56&FDEOHFURVV 8VHWKHFDEOHWKDWIXO¿OOVWKH VSHFL¿FDWLRQVKRZQLQWKHSUHYLRXVSDJH 3. Turn the computer on, and after the computer has started up turn the projector on. Communications setting 19200bps, 8N1 1. Protocol Consist of header (7 bytes) + command data (6 bytes) 2. Header BE + EF + 03 + 06 + 00 + CRC_low + CRC_high &5&BORZ/RZHUE\WHRI&5&ÀDJIRUFRPPDQGGDWD &5&BKLJK8SSHUE\WHRI&5&ÀDJIRUFRPPDQGGDWD 3. Command data Command data chart byte_0 byte_1 byte_2 byte_3 byte_4 byte_5 Action Type Setting code low high low high low high Action (byte_0 - 1) Action &ODVVL¿FDWLRQ Content 1 Set Change setting to desired value. 2 Get Read projector internal setup value. 4 Increment Increment setup value by 1. 5 Decrement Decrement setup value by 1. 6 Execute Run a command. 8
![](/manual_guide/products/hitachi-cpx308-user-manual-2147816/213.png)