Hitachi CP-X2514WN User Manual - Page 26
Using the magnify feature
![]() |
View all Hitachi CP-X2514WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Operating Using the magnify feature 1. Press the MAGNIFY ON button on the remote control. The picture will be magnified, and the MAGNIFY dialog will appear on the screen. When the MAGNIFY ON button is pressed for the first time after the projector is turned on, the picture will be zoomed by 1.5 times. On the dialog, triangle marks to show each direction will be displayed. MAGNIFY ON/OFF button VIDEO COMPUTER MY SOURCE/ DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME ON UP 㧗 OFF DOWN KEYSTONE MY BUTTON MUTE POSITION MENU 2. The display magnification of the projector switches in order with everyENTERpress of the MAGNIFY ON button. ESC RESET F or computer signals, HDMITM (RGB) signals, input signals from the LAN, USB TYPE A or USB TYPE B port 1.5times 2 times 3 times 4 times 1 time F or video signals, s-video signals, component video signals or HDMITM (Component) signals 1.5times 2 times 1 time 3. While the triangles are displayed on the dialog, use the cursor buttons to shift the magnifying area. 4. Press the MAGNIFY OFF button on the remote control to exit magnification. ● The MAGNIFY dialog will automatically disappear in several seconds with no operation. The dialog will appear again if the MAGNIFY ON button is pressed when the dialog has automatically disappeared. ● The magnification is automatically disabled when the displaying signal or its display condition is changed. ● While the magnification is active, the keystone distortion condition may vary. It will be restored when the magnification is disabled. ● Some horizontal stripes might be visible on the image while magnification is active. ● This function is not available in the following cases: - A sync signal in the range not supported is input. - There is no input signal. 26
![](/manual_guide/products/hitachi-cpx2514wn-user-manual-834b4df/26.png)