Hitachi CP-X1230 User Manual - Page 15

Operating Selecting An Input Signal 1 Select an input signal. ■ Using the INPUT dial Turn the INPUT dial of the projector. Turning the dial cycles through the input ports as shown below. Select the signal you wish to project. RGB BNC COMPONENT SEARCH button RGB BNC COMPONENT S-VIDEO VIDEO INPUT ENTER KEYSTONE SEARCH RESET MENU VIDEO S-VIDEO ■ Using SEARCH button STANDBY/ON INPUT dial TEMP LAMP Press the SEARCH button of the projector or the remote control. Pressing the button automatically cycles through input ports and displays the picture of retrieved signal. memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it will turn to the state VIDEO button it was in prior to the search. RGB button RGB BNC COMPONENT VIDEO RGB SEARCH ASPECT PinP AUTO BLANK SEARCH button VIDEO S-VIDEO ■ Using RGB button Press the RGB button of the remote control. Pressing the button toggles between the RGB ports as shown below Select the signal you wish to project. RGB BNC MAGNIFY ON OFF FREEZE - FOCUS + POSITION VOLUME MUTE KEYSTONE - ZOOM + MENU ESC ENTER RESET ■ Using VIDEO button Press the VIDEO button of the remote control. Pressing the button toggles between the VIDEO ports as shown below Select the signal you wish to project. COMPONENT S-VIDEO VIDEO 2 Use the ZOOM buttons to adjust the screen size. 3 Use the FOCUS buttons to adjust the focus. FOCUS ZOOM FOCUS buttons ZOOM buttons 15