HP t630 Administrator Guide 8 - Page 82
ZTAHENAKOS:COM1, Windows Update, Generic Manufacturer, Generic/Text Only, Share name, and then select
View all HP t630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
NOTE: The port you need is in the section of ports labeled TS###, where ### is a number between 000-009, 033-044. The appropriate port depends on your hostname and the printer you want to install. For example, with a hostname of ZTAHENAKOS and a serial printer, select the port with (ZTAHENAKOS:COM1). For a parallel printer, select (ZTAHENAKOS:LPT1). The TS### is assigned by the server, so it will not be the same every time. 6. Select the manufacturer and driver for your printer. TIP: If desired, use the driver disc Windows Update to install the driver. NOTE: For basic or test printing, the Generic Manufacturer or Generic/Text Only printer usually works. 7. If prompted to keep the existing driver and it is known to work, keep it, and then select Next. 8. Assign a name to the printer. To use it as the default printer, select Yes, and then select Next. 9. To share the printer, select Share name and assign it a share name. Otherwise, select Next. 10. On the next page, you may request a test print. HP recommends this because it will verify the printer setup is correct. If it is not set up properly, review the settings and try again. NOTE: If the thin client disconnects from the server, the printer will need to be set up again the next time the thin client connects. 70 Chapter 11 Profile Editor