HP T1500 HP UPS R/T3000 G2 Installation Instructions - Page 8

Connecting and securing the power cords 4. If the UPS is powered up, you can be sure that the UPS Network Module is seated properly and communicating with the UPS by verifying that the UPS Data LED illuminates solid green, and then flashes regularly after 2 minutes. Installing the optional UPS Network Module NOTE: It is not necessary to power down the UPS before installing the UPS Network Module. 1. Remove the two screws securing the UPS option slot cover plate and remove. Connecting the UPS Network Module The UPS Network Module is provided to manage the attached servers. RJ 45 network patch panel cables are required to use this card. The RJ 45 network patch panel cables are not included. 2. Install the UPS Network Module along the alignment channels in the option slot. 3. Secure the UPS Network Module using the two screws you removed in step 1.