HP StorageWorks MSA2324fc HP StorageWorks 2312/2324 Modular Smart Array DC pow - Page 1
HP StorageWorks MSA2324fc Manual
![]() |
View all HP StorageWorks MSA2324fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP StorageWorks 2312/2324 Modular Smart Array DC power supply replacement instructions © Copyright 2008 Hewlett-Packard Development Company, L.P. First edition: November, 2008 The information in this document is subject to change without notice. Printed in China www.hp.com About this document This document details procedures for replacing a failed DC power supply in an HP StorageWorks 2000 Family Modular Smart Array. Before you begin CAUTION: Parts can be damaged by electrostatic discharge. Use proper anti-static protection: • Keep the replacement component in the ESD bag until needed • Wear an ESD wrist strap grounded to an unpainted surface of the chassis. • If an ESD wrist strap is unavailable, touch an unpainted surface of the chassis before handling the component. • Never touch connector pins. Verifying component failure Check the DC Voltage/Fan Fault/Service Required (bottom) LED: • Amber = Fault condition Disconnecting a DC power cable IMPORTANT: Use only the DC power cables provided with your product. 1. Verify that the main breaker to the rack is shut off prior to disconnecting any DC connections. 2. Verify that all enclosure power switches are off. 3. Loosen the cable-locking screws attaching the D-shell connector to the power supply. 4. Disconnect the power cable from the power supply. 5. Turn on the main breaker to the rack. Removing a power supply 1. Turn the thumbscrew until it is disengaged from the module. 2. Rotate the latch downward to disconnect the internal connector, and slide the module out. 500919-001 Page 1
![](/manual_guide/products/hewlettpackard-msa2312i-hp-storageworks-23122324-modular-smart-array-dc-power-supply-replacement-instructions-500919001-2009-ef38804/1.png)