HP StorageWorks 4/64 HP StorageWorks Fabric OS 6.0.1a release notes (AA-RWFMA- - Page 22
Fabric OS 6.0.0b fixes, Table 7 Fabric OS 6.0.0b closed defects - san switch firmware
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Fabric OS 6.0.0b fixes Table 7 lists defects closed in the Fabric OS 6.0.0b firmware release. Table 7 Fabric OS 6.0.0b closed defects Closed defect summary Solution Auto-negotiation with specific HBAs does not bring the ports to the correct maximum speed. Fixed in Fabric OS 6.0.0b Brocade 4Gb SAN Switch for HP c-Class BladeSystem power-on-self-test (POST) failure on chassis power on. Fixed in Fabric OS 6.0.0b In a configuration where there are multiple paths configured, some DC Director port blade paths were observed not coming online. Fixed in Fabric OS 6.0.0b Host does not see devices when zone name starts with "red_". Fixed in Fabric OS 6.0.0b FICON Virtual Tape Pipelining does not function correctly with specific tape devices. Fixed in Fabric OS 6.0.0b Significant FCIP performance difference occurs between sending FC frames out from one port group to another. Fixed in Fabric OS 6.0.0b Firmware upgrade on 4/8 SAN Switch and 4/16 SAN Switch to Fabric OS 6.x will cause the switch to report marginal state. Fixed in Fabric OS 6.0.0b After login to switch using RADIUS server, switch prompt looks jumbled. Fixed in Fabric OS 6.0.0b Syntax of the portbuffershow command is inconsistent with other CLI commands. Fixed in Fabric OS 6.0.0b Fabric OS 6.0.0c fixes Table 8 lists defects closed in the Fabric OS 6.0.0c firmware release. Table 8 Fabric OS 6.0.0c closed defects Closed defect summary Solution Under rare conditions when the zoning configuration is changed, a few frames may be dropped even for zones that are not affected by the change (for 8Gb switches only). Fixed in Fabric OS 6.0.0c Port_scn removes logical paths from wrong port, causing some paths not to come on line. Fixed in Fabric OS 6.0.0c A device may disappear after server reboot in a FICON environment due to PLOGI being rejected because routing tables not yet Fixed in Fabric OS 6.0.0c established. FICON Tape Pipelining with specific tape devices results in block count mismatch errors. Fixed in Fabric OS 6.0.0c FCIP product only provides up to 2:1 compression ratio when compression enabled, but should be higher. Fixed in Fabric OS 6.0.0c 22