HP StorageWorks 1000i HP StorageWorks 1000i Virtual Library System User Guide - Page 42
guring, E-mail, alerts
![]() |
View all HP StorageWorks 1000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
• Retype Password Enter the password again. NOTE: Changing the password is required. Figure 29 Setting login information 2. Click Apply. 3. Continue the configuration process by entering the E-mail information described in the next section. Configuring E-mail alerts The VLS continuously monitors its performance and routinely checks for disk failures. If you are using an SMTP server you can enable the messaging option, in which an E-mail is sent whenever the Status of a volume on the Device Summary page becomes anything other than Normal (for example, changes to Warning). NOTE: Messages regarding capacity levels (Warning and Error) are only sent once. If your mail server is able to send E-mail messages outside the company, you can also set up messaging to notify HP Storage Technical Support automatically whenever a critical error occurs. To configure messaging 1. In the right pane, scroll down below the Logon Information section to locate the E-mail Notification section, and enter the following: • SMTP Server IP Address Using dotted decimal notation, enter the IP address of your incoming mail server. • From Address Enter the E-mail address from which the alert will be sent. This address must use the same domain as the mail server specified for SMTP Server IP Address. • Address for all messages Enter the E-mail address to which all alerts should be sent (for example, the E-mail address for the network administrator or the E-mail list address for a group of backup administrators). • Address for critical messages only Enter the E-mail address to which critical alerts only should be sent. 42 Configuring the VLS1000i
![](/manual_guide/products/hewlettpackard-storageworks-1000i-hp-storageworks-1000i-virtual-library-user-guide-406685002-2006-4dd67ef/42.png)