HP R7000 HP UPS R1500 G3 Installation Instructions - Page 4

Installing the UPS, Connecting the batteries, WARNING, IMPORTANT - review

Get HP R7000 PDF manuals and user guides View all HP R7000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

5. Use the cage nut tool to install cage nuts or clip nuts into the front of the rack. 2. Attach the chassis to the rack using the supplied screws. 6. Insert a screw through the bottom hole of the mounting rail into the cage nuts or clip nuts. 3. (optional) Insert the rear stabilization brackets into the mounting rails and then attach the brackets to the UPS. 7. Tighten the wing nuts or hex nuts. Installing the UPS Before installing the unit, review and adhere to all warnings provided in "Precautions (on page 2)." WARNING: A risk of personal injury or damage to the equipment exists. Uneven loading of equipment in the rack might cause the rack to become unstable. Install the heavier components first, and then continue to populate the rack from the bottom to the top. 1. Install the mounting rails. Connecting the batteries WARNING: The unit contains sealed lead-acid battery modules. To prevent fire or chemical burns: • Do not attempt to recharge batteries after removal from the unit. • Do not disassemble, crush, or puncture the batteries. • Do not short the external contacts of the batteries. • Do not immerse the batteries in water. • Do not expose to temperatures higher than 40°C (104°F). WARNING: To prevent personal injury from hazardous energy: • Remove watches, rings, or other metal objects. • Use tools with insulated handles. • Do not place tools or metal parts on top of batteries. IMPORTANT: Before performing the following tasks, be sure that the unit is powered down and disconnected from the utility power source.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
5.
Use the cage nut tool to install cage nuts or clip nuts into the front
of the rack.
6.
Insert a screw through the bottom hole of the mounting rail into
the cage nuts or clip nuts.
7.
Tighten the wing nuts or hex nuts.
Installing the UPS
Before installing the unit, review and adhere to all warnings provided
in "Precautions (on page 2)."
WARNING:
A risk of personal injury or damage to the
equipment exists. Uneven loading of equipment in the rack
might cause the rack to become unstable. Install the
heavier components first, and then continue to populate
the rack from the bottom to the top.
1.
Install the mounting rails.
2.
Attach the chassis to the rack using the supplied screws.
3.
(optional) Insert the rear stabilization brackets into the mounting
rails and then attach the brackets to the UPS.
Connecting the batteries
WARNING:
The unit contains sealed lead-acid battery
modules. To prevent fire or chemical burns:
•
Do not attempt to recharge batteries after removal from
the unit.
•
Do not disassemble, crush, or puncture the batteries.
•
Do not short the external contacts of the batteries.
•
Do not immerse the batteries in water.
•
Do not expose to temperatures higher than 40°C
(104°F).
WARNING:
To prevent personal injury from hazardous
energy:
•
Remove watches, rings, or other metal objects.
•
Use tools with insulated handles.
•
Do not place tools or metal parts on top of batteries.
IMPORTANT:
Before performing the following tasks, be
sure that the unit is powered down and disconnected from
the utility power source.