HP R1.5 UPS R12000 XR Backplate Receptacle Kit Installation Instructions - Page 1
HP R1.5 Manual
View all HP R1.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
hp r12000 xr backplate receptacle kit installation instructions Read instructions completely before beginning installation procedure. Overview These instructions assist qualified electricians with the installation of the HP Backplate Receptacle Kit. Save these instructions for future reference. NOTE: This kit can only be used with the HP Uninterruptible Power System (UPS) R12000 XR model. Important Safety Information Before installing this product, read the Important Safety Information guide included with this kit. WARNING: • The installation of this product must be performed by individuals who are knowledgeable about the procedures, precautions, and hazards associated with AC and DC power products. • The backplate receptacle option must be connected directly to the UPS by a qualified electrician. • The connection of the backplate receptacle option to the terminals of the UPS must be performed by a qualified electrician. • There are no user-serviceable components inside. Kit Contents • Backplate receptacle option • Important Safety Information guide • This document Tools and Materials Required The following tools are needed: • #3 Phillips screwdriver bit • Flat-head screwdriver • Metric tools - 7 mm - 8 mm © 2003 Hewlett-Packard Development Company, L.P. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. hp r12000 xr backplate receptacle kit installation instructions First Edition (February 2003) Part Number 330871-021 330871- 021