HP R/T2200 IEC-320-C14 HP Uninterruptible Power System T700 Models User Guide - Page 44

Specifications Overcurrent Protection Table C-5: Overcurrent Protection UPS Model T700 NA T700 JPN T700 H INT'L Input Protection Input Overload Protector Input Overload Protector Input Overload Protector Battery Specifications Table C-6: Battery Specifications Feature Type Voltage Charging Specification Sealed lead-acid; maintenance-free 24-V Battery String HP recommends 24 hours to allow full charge Less than 3 hours to 90 percent capacity at default nominal utility voltage and no load Battery Runtime Table C-7: Estimated Battery Runtime Load (VA) Load (Watts) Estimated Battery Runtime (Minutes) 200 128 38 300 192 27 500 320 14 600 402 9 700 500 6 Note: Battery times are approximate and may vary depending on the load configuration and battery charge. Before connecting devices, verify that the UPS will not overload by checking that the rating of the devices does not exceed the capacity of the UPS. After verifying that the UPS will not overload, connect the power cords from the devices to the appropriate output receptacles of the UPS. HP Uninterruptible Power System T700 Models User Guide C-3