HP ProLiant DL380 G3 with MSA500 ProLiant DL380 Generation 3 Packaged Cluster - Page 29
Cabling the System in the Configuration Fixture
View all HP ProLiant DL380 G3 with MSA500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setup and Installation of the Packaged Cluster Cabling the System in the Configuration Fixture NOTE: The server fixture should be placed on top of the storage fixture for ease in cabling the packaged cluster. 1. Connect the VHDCI SCSI cables labeled A and B from the storage system to the servers. NOTE: Save the protective covers on the cable connectors for use when the packaged cluster is repacked. 2. If you are configuring a Microsoft or Linux operating system, connect the Ethernet crossover cable between the servers. Use the same RJ-45 connector (1), NIC 1, on each server. 2-14 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide
Setup and Installation of the Packaged Cluster
Cabling the System in the Configuration Fixture
NOTE:
The server fixture should be placed on top of the storage fixture for ease in cabling the
packaged cluster.
1.
Connect the VHDCI SCSI cables labeled
A
and
B
from the storage system to the
servers.
NOTE:
Save the protective covers on the cable connectors for use when the packaged
cluster is repacked.
2.
If you are configuring a Microsoft or Linux operating system, connect the
Ethernet crossover cable between the servers. Use the same RJ-45 connector (1),
NIC 1, on each server.
2-14
HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide