HP OMEN Transcend 14 Maintenance and Service GuideOMEN Transcend 14 inch Gamin - Page 50

Remove the Phillips M2.0 × 2.5 screw, that secures the WLAN module.

Get HP OMEN Transcend 14 PDF manuals and user guides View all HP OMEN Transcend 14 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Table 5-8 WLAN module descriptions and part numbers Description Intel AX211 Wi-Fi 6E Bluetooth 5.3 WLAN Intel Wi-Fi 7 BE200 + Bluetooth 5.4 (802.11be 2 × 2, 320 MHz) WLAN antenna plastic antenna protector Spare part number N91851-001 N91852-001 N84258-001 IMPORTANT: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. Before removing the WLAN module, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 30). 2. Remove the bottom cover (see Bottom cover on page 30). 3. Disconnect the battery cable from the system board (see Battery on page 31). 4. Remove the heat sink (see Heat sink on page 42). Remove the WLAN module: 1. Lift the cloth protector (1) that covers the antenna connectors. 2. Remove the Phillips M2.0 × 2.5 screw (2) that secures the WLAN module. 3. Carefully disconnect the antenna cables (3) from the module. 4. Pull the WLAN module (4) out of the connector. NOTE: When connecting the antenna cables, be sure to match the number or letter on the cable with the appropriate connector on the module. 44 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Table 5-8
WLAN module descriptions and part numbers
Description
Spare part number
Intel AX211 Wi-Fi 6E Bluetooth 5.3 WLAN
N91851-001
Intel Wi-Fi 7 BE200 + Bluetooth 5.4 (802.11be 2 × 2, 320 MHz)
N91852-001
WLAN antenna plastic antenna protector
N84258-001
IMPORTANT:
To prevent an unresponsive system, replace the wireless module only with a wireless
module authorized for use in the computer by the governmental agency that regulates wireless
devices in your country or region. If you replace the module and then receive a warning message,
remove the module to restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
30
).
2.
Remove the bottom cover (see
Bottom cover
on page
30
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
31
).
4.
Remove the heat sink (see
Heat sink
on page
42
).
Remove the WLAN module:
1.
Lift the cloth protector
(1)
that covers the antenna connectors.
2.
Remove the Phillips M2.0 × 2.5 screw
(2)
that secures the WLAN module.
3.
Carefully disconnect the antenna cables
(3)
from the module.
4.
Pull the WLAN module
(4)
out of the connector.
NOTE:
When connecting the antenna cables, be sure to match the number or letter on the cable
with the appropriate connector on the module.
44
Chapter 5
Removal and replacement procedures for authorized service provider parts