HP Indigo 10000 HD Writing Head Service Document - Page 34
The screw should be rotated only when its rotation is free, meaning that no damper
![]() |
View all HP Indigo 10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
13. Make a mark on each of the 3 mounting screws and the aluminum bracket around the screw as shown below. 14. Lift the WH slightly with your hand to release the damper from WH load. Turn the screw 1 full turn clockwise while lifting. NOTE: The screw should be rotated only when its rotation is free, meaning that no damper resistance is felt. 32 Chapter 2 Procedures
![](/manual_guide/products/hewlettpackard-indigo-10000-hd-writing-head-service-document-089677d/34.png)
13.
Make a mark on each of the 3 mounting screws and the aluminum bracket around the screw as
shown below.
14.
Lift the WH slightly with your hand to release the damper from WH load. Turn the screw 1 full turn
clockwise while lifting.
NOTE:
The screw should be rotated only when its rotation is free, meaning that no damper
resistance is felt.
32
Chapter 2
Procedures