HP Desktop Pro A G3 Maintenance and Service Guide - Page 61
Solving display problems, If you encounter display problems
View all HP Desktop Pro A G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Do not know how to remove a media card correctly. Cause The computer's software is used to safely eject the card. Solution In Windows 10, type file in the taskbar search box, and then select File Explorer from the list of applications. In the left column, expand This PC, right-click on the corresponding drive icon, and then select Eject. Pull the card out of the slot. NOTE: Never remove the card when the green LED is flashing After installing the media card reader and booting to Windows, the reader and the inserted cards are not recognized by the computer. Cause Solution The operating system needs time to recognize the device if the reader was just installed into the computer and you are turning the PC on for the first time. Wait a few seconds so that the operating system can recognize the reader and the available ports, and then recognize the media inserted in the reader. After inserting a media card in the reader, the computer attempts to boot from the media card. Cause Solution The inserted media card has boot capability. 1. If you do not want to boot from the media card, remove it during boot or do not select the option to boot from the inserted media card during the boot process. 2. During POST (Power On Self-Test), press F9 to modify the boot menu. 3. Change the boot sequence in F10 Computer Setup under Boot Options. Solving display problems If you encounter display problems, see the documentation that came with the monitor and to the common causes and solutions listed in the following table. Blank screen (no video). Cause Monitor is not turned on and the monitor light is not on. Bad monitor. The cable connections are not correct. You may have a screen blanking utility installed or energy saver features are enabled. You are using a fixed-sync monitor and it will not sync at the resolution chosen. Computer is in Sleep state. Solution Turn on the monitor and check that the monitor light is on. Try a different monitor. Check the cable connection from the monitor to the computer and to the electrical outlet. Press any key or click the mouse button and type your password (if set). Be sure that the monitor can accept the same horizontal scan rate as the resolution chosen. Press the power button to resume from Sleep state. Solving display problems 53