HP D5970A HP Netserver LH 3000/3000r to LH 6000/6000r Upgrade Guide - Page 24
Notches, Retaining Clips
![]() |
View all HP D5970A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Chapter 4 1A 2A 3A 4A 1B 2B 3B 4B Installing LH 6000/6000r Components Figure 4-1. DIMM Sockets on LH 6000/6000r System Board 2. Locate the socket in which you will install the DIMM, and spread the two retaining clips outward (see Figure 4-2). 3. Hold the DIMM at a 90-degree angle to the system board. Be sure to handle the module by its ends; do not touch the pins. 4. Align the notches on the DIMM with the keys in the socket. DIMM Notches Keys Retaining Clips Figure 4-2. Installing the DIMM in a Socket 20
![](/manual_guide/products/hewlettpackard-lh3000r-hp-netserver-lh-30003000r-lh-60006000r-upgrade-guide-96c1bb6/24.png)
Chapter 4
Installing LH 6000/6000r Components
20
1A
1B
2A
2B
3A
3B
4A
4B
Figure 4-1. DIMM Sockets on LH 6000/6000r System Board
2.
Locate the socket in which you will install the DIMM, and spread the two
retaining clips outward (see Figure 4-2).
3.
Hold the DIMM at a 90-degree angle to the system board. Be sure to
handle the module by its ends; do not touch the pins.
4.
Align the notches on the DIMM with the keys in the socket.
Notches
Keys
Retaining Clips
DIMM
Figure 4-2. Installing the DIMM in a Socket