HP D5970A HP Netserver LH 3 NetRAID Config Guide for Windows NT4.0 Clusters - Page 3
HP 4.2 GB 10K rpm Hot-Swap Ultra SCSI Disk Module D4903A
![]() |
View all HP D5970A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Logical disks Configuration options: Cabinet Model No. of cabinets Disk drives: RAID arrays Cables LANs LAN connection NIC: Model Driver No. of NICs SPU I\O slot 1 per RAID array 6 maximum per NetRAID adapter Cluster mode on (cache write-through) Ultra SCSI disabled BIOS disabled Set any other options as you prefer HP Rack Storage/8 D4902A 1 - 2 HP 4.2 GB Hot-Swap Ultra SCSI Disk Module D3583C HP 4.2 GB 10K rpm Hot-Swap Ultra SCSI Disk Module D4903A HP 9.1 GB Hot-Swap Ultra SCSI Disk Module D4289A HP 9.1 GB 10K rpm Hot-Swap Ultra SCSI Disk Module D6019A HP 18.2 GB Hot-Swap Ultra SCSI Disk Module D5039A A RAID array (logical disk) must be composed of all the same disk model (i.e., part number and suffix). Different size or speed disks are not allowed in the same RAID array. Any combination of disk models is allowed on a SCSI channel. Any combination of disk models is allowed in a cluster. HP D5957A Cluster Adapter. See Shared Storage Cabling below. Intra-cluster (Heartbeat) LAN HP D5954A crossover cable or any equivalent. The intra-cluster LAN may only be used for cluster node communication via a crossover cable. It may not be used for client communication. HP D5013A (10/100TX PCI) (or HP J3171A) 3.00.06.004 or later 1 P1 Client LAN Any LAN Any that is on both the HP Tested Products List and the Microsoft Hardware Compatibility List. Any driver If the NIC used is the same as the Intra-cluster LAN, then the Client LAN must use the same driver as the Intra-cluster LAN. 1 minimum P2 3
![](/manual_guide/products/hewlettpackard-lh3000r-hp-netserver-lh-3-netraid-config-guide-windows-nt40-clusters-a4b2a93/3.png)