HP D2D4009fc HP StorageWorks Linux and UNIX configuration guide for D2D Backup - Page 37
The NFS share can then be mounted in HP-UX using the mount command. For example
View all HP D2D4009fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
4. To display the device files associated with the operational target devices, type: # ioscan -fn Class I H/W Path Driver S/W State H/W Type Description ba 4 0/5 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783) fc 5 0/5/1/0 fcd CLAIMED INTERFACE HP AB379-60001 4Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 1) /dev/fcd5 fcp 11 0/5/1/0.166 fcd_fcp CLAIMED INTERFACE FCP Domain ext_bus 33 0/5/1/0.166.0.255.0 fcd_vbus CLAIMED INTERFACE FCP Device Interface target 8 0/5/1/0.166.0.255.0.1 tgt CLAIMED DEVICE autoch 1 0/5/1/0.166.0.255.0.1.0 schgr CLAIMED DEVICE HP MSL G3 Series /dev/rac/c33t1d0 target 9 0/5/1/0.166.0.255.0.2 tgt CLAIMED DEVICE tape 23 0/5/1/0.166.0.255.0.2.0 stape CLAIMED DEVICE HP Ultrium 3-SCSI /dev/rmt/1m /dev/rmt/1mn /dev/rmt/c33t2d0BEST /dev/rmt/c33t2d0BESTn /dev/rmt/1mb /dev/rmt/1mnb /dev/rmt/c33t2d0BESTb /dev/rmt/c33t2d0BESTnb In this example the tape drives device files are: /dev/rmt/1m /dev/rmt/1mb /dev/rmt/1mn /dev/rmt/1mnb /dev/rmt/c33t2d0BEST /dev/rmt/c33t2d0BESTb /dev/rmt/c33t2d0BESTn /dev/rmt/c33t2d0BESTnb AT&T, best density available Berkeley, best density available AT&T, no rewind, best density available Berkeley, no rewind, best density available AT&T, best density available Berkeley, best density available AT&T, best density available Berkeley, no rewind, best density available And the autochanger device file is: /dev/rac/c33t1d0 Configuring the HP D2D Backup System for NAS (NFS) The D2D Backup System NAS interface should be configured to use NFS as the Access Protocol when backing up data using HP-UX. The NFS share can then be mounted in HP-UX using the mount command. For example: # mount 192.168.0.100:/nas/D2DBackupShare /mnt/D2DBackupShare D2D Backup System 37