HP Chromebook 11A G8 EE Maintenance and Service Guide - Page 52
Display assembly, or similar thin, plastic tool to separate the left
View all HP Chromebook 11A G8 EE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Display assembly NOTE: The display assembly is available as spare parts at the subcomponent level only. See the removal section for each component for information. Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 24). 5. Disconnect the battery from the system board (see Battery on page 32). Remove the display assembly: 1. Remove the display hinge cover by following these steps: a. Close the computer. b. Turn the computer upside down with the front toward you. c. Use a case utility tool (1) or similar thin, plastic tool to separate the left (2) and right edges of the hinge cover from the display assembly. d. Remove the hinge cover (3). The hinge cover is available using spare part numbers L89769-001 (in chalkboard gray finish) and L89770-001 (in dark sage gray finish). 2. Remove the display bezel by following these steps: 44 Chapter 5 Removal and replacement procedures