HP BL2x220c BBWC Battery Option Installation Insturctions for HP ProLiant BL2x - Page 1
HP BL2x220c - ProLiant - G5 Server A Manual
View all HP BL2x220c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
BBWC Battery Option Installation Instructions for the HP ProLiant BL2x220c Generation 5 Server Blade Kit contents • Battery tray • Cables (2) • Cable clips (2) • Cache batteries (2) • Cable shield • This document In addition to the contents of this kit, the mezzanine card installation documentation is required. Installing a cache module battery To install the component: 1. Power down the server blade. 2. Remove the server blade. 3. Remove the server B assembly: a. Place the server blade on a flat, level work surface with the bezel facing away from you. b. Extend the server B serial label pull tab. CAUTION: The jackscrews control the unseating and seating of critical system connectors. Failure to use the jackscrews to remove and install the server B assembly can cause the system boards to fail. c. Turn the jackscrew on the right approximately six turns counterclockwise. d. Turn the jackscrew on the left counterclockwise until the threads are fully disengaged. e. Turn jackscrew on the right counterclockwise until the threads are fully disengaged. CAUTION: To prevent damage to the server blade, do not apply pressure to the enclosure connector. f. Lift server B assembly from server A assembly, and then place it on the work surface with the system board facing up. © Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Part Number 468229-002 March 2008 (Second Edition) 4. Remove the server A USB key, if installed.