HP AJ732A Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem User Guide - Page 34
LED patterns, POST and boot specifications, POST
UPC - 883585789481
View all HP AJ732A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
LED patterns Table 12 summarizes LED color and meaning. Table 12 Port link status LED patterns LED color Status of Hardware Solid green Link is up. Steady flashing green Link is up (beacon used to identify port). Flashing green Solid amber Flashing amber Link is up (traffic on port). Link is disabled by software. A fault condition exists. Off No link. The following indicates port link speeds: • No light - 1Gbps • Green - 2 Gbps • Amber - 4 Gbps • Shows green/amber - Invalid SFP POST and boot specifications POST is a system check that is performed each time the switch is powered on, rebooted, or reset. During POST, the LEDs flash different colors. Any errors that occur during POST are listed in the error log. The Cisco MDS 9124e Switch performs POST when it is turned on or rebooted. Total boot time with POST is approximately three minutes. POST The success or failure results of the diagnostic tests that run during POST can be monitored through the error log or the command line interface. POST includes the following steps: • Preliminary POST diagnostics are run. • Operating system is initialized. • Hardware is initialized. • Diagnostic tests are run on several functions, including circuitry, port functionality, memory, statistics counters, and serialization. 34 Managing the Switch