HP AJ732A Cisco Nexus 5000 Series Hardware Installation Guide (OL-15902-01, No - Page 52
Installing the Cisco Nexus 5010 Chassis in a Cabinet or Rack
UPC - 883585789481
View all HP AJ732A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Installing the Cisco Nexus 5010 Chassis in a Cabinet or Rack Chapter 2 Installing the Cisco Nexus 5000 Switch Send documentation comments to [email protected] Step 5 Stabilize the switch in the rack by attaching the front rack-mount brackets to the front rack-mounting rails: a. Insert two screws (12-24 or 10-32, depending on rack type) through the cage nuts and the holes in one of the front rack-mount brackets and into the threaded holes in the rack-mounting rail. See Figure 2-4. b. Repeat for the front rack-mount bracket on the other side of the switch. Figure 2-4 Attaching the Switch to the Rack 186414 Installing the Cisco Nexus 5010 Chassis in a Cabinet or Rack This section describes how to use the rack-mount kit provided with the switch to install the Cisco Nexus 5010 switch into a cabinet or rack that meets the requirements described in Appendix A, "Cabinet and Rack Installation." All Cisco Nexus 5000 switches use the same installation procedure. Caution If the rack is on wheels, ensure that the brakes are engaged or that the rack is otherwise stabilized. Table 2-1 lists the items contained in the rack-mount kit provided with the switch. Table 2-2 Cisco Nexus 5010 Switch Rack-Mount Kit Quantity 2 12 2 10 10 2 Part Description Rack-mount brackets M4x0.7 x 8-mm Phillips countersunk screws Rack-mount guides 10-32 Rack Nuts 10-32 x 3/4-inch Phillips countersunk screws Slider rails Cisco Nexus 5000 Series Hardware Installation Guide 2-8 OL-15902-01