HP AJ732A Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1( - Page 50
Symptom, Workaround, Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.11b
UPC - 883585789481
View all HP AJ732A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Caveats Send documentation comments to [email protected] • CSCso36760 Symptom: In Fabric Manager Release 3.3(x), zone set cloning returns an autoZoneEditing error. The option to clone a zone is missing. Workaround: This issue is resolved. • CSCso41087 Symptom: If FCIP is enabled and the SAN-OS is upgraded, the SNMP service will run into exception and the following syslog message is displayed: SNMP Operation(165) failed (62) setting error index. Workaround: This issue is resolved. • CSCso85603 Symptom: Performing an ISSU from SAN-OS Release 3.3.1c to NX-OS Release 4.1(1b) may fail when SME has been provisioned on the switch. Workaround: This issue is resolved. • CSCsq29607 Symptom: After logging back into Fabric Manager Client, clicking on the Summary tab causes a disconnect. Workaround: This issue is resolved. • CSCsq44360 Symptom: When the startup rising alarm is triggered, the sample value is smaller than the rising threshold. This should not trigger an alarm. Workaround: This issue is resolved. • CSCsq64637 Symptom: All device aliases in Fabric Manager disappear when adding new device aliases. Workaround: This issue is resolved. • CSCsq69543 Symptom: Fabric Manager does not update PortChannel changes. Workaround: This issue is resolved. • CSCsr11269 Symptom: The fctimer does not work with Cisco Fabric Services (CFS). Commits are not successful, and changes can not be made. The following error message is displayed: dctl-m9509-190-NAC-B1(config)# fctimer E_D_TOV 1050 vsan 1 Warning:The vsan will be temporarily suspended when updating the timer value This configuration would impact whole fabric. Do you want to continue? (y/n) y 2008 Jul 1 11:34:39 dctl-m9509-190-NAC-B1 %CFS-2-MTS_REJECT: Verification failed reject MTS message SAP 15:RR-token 0x64f82 Workaround: This issue is resolved. • CSCsr11845 Symptom: The JAB serial number shows as the secondary serial number (Fox serial number shows as the primary serial number) in MDS 9100 Series switches. This results in Call Home notifications with the Fox serial number. Workaround: This issue is resolved. Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(1b) 50 OL-17675-02