HP 5100tn HP LaserJet 5100 Series - Start Guide - Page 21
Step 10. Change the control panel overlay (optional), up on the overlay until it comes off.
![]() |
View all HP 5100tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
English Step 10. Change the control panel overlay (optional) If necessary, use the following procedure to install the appropriate control panel overlay for your language. 1 Locate the control panel overlays in the output bin of the printer. (These overlays might have moved during shipping.) 2 If necessary, remove the overlay currently installed on the printer: a Open the printer's top cover. b Insert a thin, rigid object under the edge of the overlay, and then pull up on the overlay until it comes off. c Close the top cover. 3 Place the desired control panel overlay onto the control panel and snap it into place. ENWW start guide 19
![](/manual_guide/products/hewlettpackard-5100-hp-laserjet-5100-series-start-guide-3cfde73/21.png)
ENWW
start guide
19
English
Step 10. Change the control panel
overlay (optional)
If necessary, use the following
procedure to install the appropriate
control panel overlay for your
language.
1
Locate the control panel overlays in
the output bin of the printer. (These
overlays might have moved during
shipping.)
2
If necessary, remove the overlay
currently installed on the printer:
a
Open the printer’s top cover.
b
Insert a thin, rigid object under the
edge of the overlay, and then pull
up on the overlay until it comes off.
c
Close the top cover.
3
Place the desired control panel
overlay onto the control panel and
snap it into place.