Harbor Freight Tools 62891 User Manual - Page 12

Cleaning, Maintenance, and Lubrication

Get Harbor Freight Tools 62891 - 1/2 in. Composite Xtreme Torque Air Impact Wrench PDF manuals and user guides View all Harbor Freight Tools 62891 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

SAFETy SETUp User-Maintenance Instructions procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Turn off the tool, detach the air supply, safely discharge any residual air pressure in the tool, and release the throttle and/or turn the switch to its off position before performing any inspection, maintenance, or cleaning procedures. TO pREVENT SERIOUS INJURy FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise, vibration, or leaking air occurs, have the problem corrected before further use. TO pREVENT SEROUS INJURy FROM EXpLOSION: Lubricate the tool only with specified lubricants. Lubricate the air inlet using only pneumatic tool oil. Other lubricants may damage the mechanism and may be highly flammable, causing an explosion. cleaning, Maintenance, and Lubrication Note: These procedures are in addition to the regular checks and maintenance explained as part of the regular operation of the air-operated tool. 1. BEFORE EAcH USE, inspect the general condition of the tool. Check for: • loose hardware or housing • misalignment or binding of moving parts • cracked or broken parts • any other condition that may affect its safe operation. 2. Daily - Air Supply Maintenance: Every day, maintain the air supply according to the component manufacturers' instructions. Maintain the lubricator's oil level. Drain the moisture filter regularly. Performing routine air supply maintenance will allow the tool to operate more safely and will also reduce wear on the tool. 3. Weekly - Grease Lubrication: Lubricate the internal mechanism of the tool, using white lithium grease through the grease fittings. 4. Quarterly (every 3 months) - Tool Disassembly, cleaning, and Inspection: Have the internal mechanism cleaned, inspected, and lubricated by a qualified technician. If the vanes need replacement, replace them all as a set. OpERATION MAINTENANcE Page 12 For technical questions, please call 1-888-866-5797. Item 62891 62892

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
Page 12
For technical questions, please call 1-888-866-5797.
Item 62891 62892
SAFETY
OPERATION
MAINTENANCE
SETUP
User-Maintenance Instructions
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn off the tool, detach the air supply, safely discharge any residual air pressure
in the tool, and release the throttle and/or turn the switch to its off position before
performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment.
If abnormal noise, vibration,
or leaking air occurs, have the problem corrected before further use.
TO PREVENT SEROUS INJURY FROM EXPLOSION:
Lubricate the tool only with specified lubricants.
Lubricate the air inlet using only
pneumatic tool oil.
Other lubricants may damage the mechanism and may be
highly flammable, causing an explosion.
Cleaning, Maintenance, and Lubrication
Note:
These procedures are in addition to the regular checks and maintenance
explained as part of the regular operation of the air-operated tool.
1.
BEFORE EACH USE,
inspect the general
condition of the tool.
Check for:
• loose hardware or housing
• misalignment or binding of moving parts
• cracked or broken parts
• any other condition that may
affect its safe operation.
2.
Daily - Air Supply Maintenance:
Every day, maintain the air supply according
to the component manufacturers' instructions.
Maintain the lubricator's oil level.
Drain the moisture filter regularly.
Performing routine air supply maintenance
will allow the tool to operate more safely
and will also reduce wear on the tool.
3.
Weekly - Grease Lubrication:
Lubricate the internal mechanism of the tool, using
white lithium grease through the grease fittings.
4.
Quarterly (every 3 months) –
Tool Disassembly, Cleaning, and Inspection:
Have the internal mechanism cleaned, inspected,
and lubricated by a qualified technician.
If the vanes need replacement,
replace them all as a set.