Haier HWM88-113S User Manual - Page 7

How to change the direction of the drain hoses Figure 1 indicates the ex factory installatio n positi on of the drain hose. Extend the drain hose from the side of spin tub. Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fix ing hook outwards gently to take out the drain hose from the two fix ing hooks. (As per Figure 2) Figure 1 Side sectional view Drain hose Fixing hook fixing hook installation hole Pull outwards slightly Drain hose Drain hose fix ing hook Take off the drain hose Figure 2 Rotate the drain hose fix ing hook for 90 to take it out fro m the installatio n hole (As per Figure 3). Install the two drain hose fix ing hooks taken out into the installatio n hole at the other side of the base frame (to aim at the installatio n hole accurately you can lean the washing machine forward slightly ).Then rotate for 90 (As per Figure 4). Rotate the fixing hook for 90 Take off the fix ing hook downwards Figure 3 Pull the fix ing hook outwards slig htly. Inlay the drain hose into the fix ing hooks relia bly along the groove at spin tub side, and make it extend towards spin tub side. Figure 5 Then hang the drain hose into the hanging hole at the spin tub side. (As per Figure 5). Rotate the fix ing hook for 90 to fix it Insert the fixing hook into the installa tion hole upwards Figure 4 Figure 6 Extend the drain hose from the rear side Take out the drain hose from the fix ing hook. Extend it from the rear side (When the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 6). 5