Haier HR-SC User Manual - Page 12

Directions for use ■■ Directions  After setting the dated time and temperature, the system will heat water to the dated temperature before dated time. When it is the dated time, the system will maintain the temperature for 30 minutes; while the current temperature is 5°C lower than the set temperature, it will start the electric heating. During the heating course of dated time, staged and temporary heating is utilized. Absorb solar energy in priority. When solar heating can not realize dated temperature, start electric heating for supplement. Thus presetted heating needs operation in longer advance. It is normal phenomenon.  If it is intended to date one time, set the two same dated time. „„ The instant heating mode is as follows: Press the button again, then B twinkles; press the button to set the temperature for instant heating. The setting range is from 30°C to 75°C with the default value 65°C. ■■ Directions In the instant heating mode, the system will detect whether current water temperature in water storage tank reaches the set temperature, if it is lower than the set temperature, start electric heating immediately. At the same time instant heating indication light twinkles with green. While heating to the set temperature, automatically switch to solar heating mode. Then on-demand indication light is off and solar energy heating indication light is on. Notice In the instant heating mode, solar energy temperature difference circulation will be in normal operation. 12 Haier solar station $4)+JOEE


 1.