Haier HL42XLE2a User Manual - Page 11

C Then, make the corresponding audio connection by connecting an audio cable from your PC's audio out or headphone jack to the TV's PC/DVI audio in jack. If using a sound card, adjust the VGA sound as required. Mode VGA SVGA XGA Installation Resolution 640s480 800s600 1024s768 Frame frequency (Hz) 60Hz 60Hz 75Hz 60Hz 75Hz PC PC/DVI AUDIO PC IN Back of TV How to use A Turn on the computer and the TV. B Use INPUT on the remote control to select VGA or HDMI source. C Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in VGA mode. If noise is present, change the VGA mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the VGA graphic card can not be changed, change the VGA graphic card or consult the manufacturer of the VGA graphic card. Note R Use a DVI cable. R Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently imprinted on the screen. R The synchronization input form for Horizontal and Vertical frequencies is separate. Y Resolution HDMI and DVI input When the source device (DVD player , Bluray player, or Set Top Box) supports HDMI How To Connect A Connect the source device to the HDMI port of this TV with an HDMI cable (not supplied with this product). B No separated audio connection is necessary. How To Use q If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to the appropriate resolution1280s720p. q If the source device does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the source device , if available, to 1280s720p for the 32" TV and 1920 x 1080 for the 37" and 42" TVs. q Press the INPUT button to select the corresponding HDMI input source.Select HDMI input source in input source option of Select Main source menu. When the source device (DVD player , Bluray player, or Set Top Box) supports DVI How To Connect A Connect the source device to the HDMI port of the TV with a HDMI-to-DVI cable (not supplied with this product). Haier LED HDTV EN-10