Graco 3-in-1 Owners Manual - Page 32
Choosing an Appropriate Vehicle Seat Location
View all Graco 3-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
4. Tighten vehicle seat belt Push down hard with your knee or free hand in the middle of the child restraint . Then pull and tighten the shoulder portion of the lap/shoulder belt. 5. While pulling the shoulder portion of the lap/shoulder belt, lay the shoulder belt inside the opened lock-off and snap the lock-off over the shoulder belt . Two lock-offs are provided to allow for the seat to be installed on the right or left side of the vehicle seat. Only use one lock-off at a time. NEVER try to use both lock-offs when installing the child restraint. DO NOT try to close the lock-off over anything but the shoulder portion of the vehicle lap/shoulder belt. If any other part of the belt is in the way then try another seat location. For more information on how to tighten the belt for your seat belt system, see Section 7.0 Choosing an Appropriate Vehicle Seat Location, p.18, or your vehicle owner's manual. 32