Gigabyte 3D Mercury User Manual - Page 9
Installation, Instruction
View all Gigabyte 3D Mercury manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English 4. Installation Instruction 4-1-3 Secure the power supply onto the retainer plate, by using the 4 fixed screws. Please follow the reference sections in order for installation 4-1 Installation of Power Supply To facilitate the installation, it is recom- mended to set the chassis upright on the table. Required Tools: power supply securing screw x 4 4-1-4 Slide in the power supply from the rear of the chassis. 4-1-1 Remove the thumb screws of the left side panel and detach the left panel by unlatching the side panel. 4-1-2 Remove the thumb screws of the power supply retainer plate at the back of the chassis and remove. 4-1-5 Use the thumb screws to secure the power supply retainer plate to the rear of the chassis. 9
English
9
4. Installation
Instruction
Please follow the reference
sections in order for installation
4-1 Installation of Power
Supply
To facilitate the installation, it is recom-
mended to set the chassis upright on the
table.
Required Tools: power supply securing
screw x 4
4-1-1 Remove the thumb screws of the
left side panel and detach the left panel
by unlatching the side panel.
4-1-2 Remove the thumb screws of the
power supply retainer plate at the back
of the chassis and remove.
4-1-3 Secure the power supply onto
the retainer plate, by using the 4 fixed
screws.
4-1-4 Slide in the power supply from the
rear of the chassis.
4-1-5
Use the thumb screws to secure
the power supply retainer plate to the
rear of the chassis.