GE PVW7301SJSS Quick Specs - Page 1

PVW7301SJ/EJ GE Profile™ Series 30" W1a0-l3l/1-6M" ount Glass Canopy Chimney Hood Dimensions and Installation Information (in inches) Installation Information: Before installing, consult Use & packed with product for ­current Cdaim*rHeee/tnoiignshisottnaallladtiaotna11.in-3s/t4r"uctions PVW7301SJ_EJ Ceiling Optional Accessories JXDC71SS/ES-10(ft.) Ceiling Duct Cover Kit Max ceiling height installation with kit - 10'-0" JXRC70-Remote Control PVW7301SJ_EJ 1-3/4" 10-3/16" *Height to Ceiling 11-3/4" 30" Models Require a 30"-Wide Opening *The supplied duct cover fits 7'-5" to 9'-3" ceiling heights (10" with optional high ceiling kit JXDC71) JXCF71-Charcoal Filter 18-1/2" 30" (needed if used in recirculation mod30e")Models Require a 30"-Wide Opening Amp Rating 120V 5.3 *The supplied duct cover fits 7'-5" to 9'-3" ceiling heights (10' with optional high ceiling kit JXDC71) 18-1/2" 30" 1-3/4" 30" Models Require a 30"-Wide Opening *The supplied duct cover fits 7'-5" to 9'-3" ceiling heights (10' with optional high ceiling kit JXDC71) 24" Min 36" Max The vent hood must be installed 24" min. and 36" max. above the cooking surface. The hood installation height above the cooking surface depends upon ceiling height. The telescopic duct cover conceals the ductwork running from the top of the hood to the ceiling. NOTE: Installa2ti4on" hMeiignht should be measured from the cooking surface to the lowest part of th3e6h"oModa. Txhis hood may be installed onto a wall and vented to the outdoors, or it can be installed for recirculating operation. Parts for recirculating operation are supplied with the hood. However, when installed for recirculating operation, the optional charcoal filter JXCF71 will need to be purchased separately. The vent hood must be installed 24" min. and 36" max. above the cooking surface. The hood installation height above the cooking surface depends upon ceiling height. The telescopic duct cover conceals the ductwork running from the top of the hood to the ceiling. NOTE: Installation height should be measured from the cooking surface to the lowest part of the hood. This hood may be installed onto a wall and veFnoterdatontshwe oeurtsdotoorsy, ooruitrcManobneoingsrtaallmed,® GE Profile™ for recirculating operation. Parts for recirculating operatioonrarGe Esu®ppaliepdpwliitahnthceehTqohuoedev.seHntoitwohnoevosed,r,mvwiuhsseitntbeoiunsrtawlleedbs24it" emin. and 36" max. above the cooking surface. installed for recirculating operation, the optional charcoal aFitltegreJaXCpFp7l1iwainll nceeesd.ctooThmbeehpoourorcdchainalsslteadGllasEetipoaAnrahnteseiglwyh.et rabCoveenttheerc®ooking surface depends upon ceiling height. The telescopic duct cover conceals the ductwork running from the top of the hood to the ceiling. service, 800.626.2000. NOTE: Installation height should be measured from the cooking surface to the lowest part of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installed for recirculating operation. Parts for recirculating operation are supplied with the hood. However, when installed for recirculating operation, the optional charcoal Filter JXCF71 will need to be purchased separately. Listed by Underwriters Laboratories Specification Revised 4/15