GE PSB48YGXSV Use and Care Manual - Page 38
A Install Door Panels
UPC - 084691172949
View all GE PSB48YGXSV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Installation Instructions 11A INSTALL DOOR PANELS Handle Fresh Food Refrigerator Door 3/4" Custom Panel if Required Install 1/4″ Decorative Panels: • Remove Pre-Installed Handles Open door to 90°. Remove 5 Phillips head screws from the Fresh Food and Freezer door handles; retain all screws. Lift off pre-installed door handles. • Install Door Panels NOTE: Carefully push the Fresh Food panel in until it slides into the slot behind the trim. Gently push to opposite side. Repeat procedure for upper and lower Freezer panels. • Install Custom Trim Install the custom trim with the original 5 Phillips head screws. Tighten. Repeat for Freezer door. NOTE: Ensure that the edge of the custom trim does not pinch the door gasket. • 3/4″ Custom Decorative Panels If you choose to install custom wood panels, they must be cut to dimensions shown on pages 23-30. The panels will slide into the frame on the doors and grille. If using custom handles, please see Door Handles on page 20. IMPORTANT NOTE: Maximum custom panel thickness must not exceed 1-1/8″ thick and 70 lbs for the Fresh Food door, 45 lbs total for the Freezer door and 15 lbs for the Grille panel. Custom Trim 38