GE PS960BLTS Use and Care Manual - Page 24

Oven Light, CARE AND CLEANING

Page 24 highlights

CARE AND CLEANING:2YHQ'RRUV Oven Light WARNING SHOCK OR BURN HAZARD: Before replacing oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn. CAUTION BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot glass with bare hands or a damp cloth can cause burns. Oven Light Replacement To remove:  7XUQWKHJODVVFRYHUFRXQWHUFORFNZLVHWXUQXQWLO the tabs of the glass cover clear the grooves of the socket. Wearing latex gloves may offer a better grip.  8VLQJJORYHVRUDGU\FORWKUHPRYHWKHEXOEE\SXOOLQJ it straight out. To replace:  8VHDQHZYROWKDORJHQEXOEQRWWRH[FHHG 50 watts. Replace the bulb with the same type of bulb that was removed. Be sure the replacement bulb is rated 120 volts or 130 volts (NOT 12 volts).  8VLQJJORYHVRUDGU\FORWKUHPRYHWKHEXOEIURPLWV SDFNDJLQJ'RQRWWRXFKWKHEXOEZLWKEDUHILQJHUV2LO from skin will damage the bulb and shorten its life. 3. Push the bulb straight into the receptacle all the way. 4. Place the tabs of the glass cover into the grooves of WKHVRFNHW7XUQWKHJODVVFRYHUFORFNZLVHWXUQ For improved lighting inside the oven, clean the glass cover frequently using a wet cloth. This should be done when the oven is completely cool. 5. Reconnect electrical power to the oven. Receptacle Socket G9 Bulb Tab Glass cover (on some models) Receptacle 8VHJORYHV or cloth 24 49-80808

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

24
49-80808
WARNING
SHOCK OR BURN HAZARD:
Before replacing oven light bulb, disconnect the electrical power to the
range at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.
CAUTION
BURN HAZARD:
The glass cover and bulb should be removed when cool. Touching hot glass with
bare hands or a damp cloth can cause burns.
Oven Light Replacement
To remove:
the tabs of the glass cover clear the grooves of the
socket. Wearing latex gloves may offer a better grip.
it straight out.
To replace:
50 watts. Replace the bulb with the same type of bulb
that was removed. Be sure the replacement bulb is
rated 120 volts or 130 volts (NOT 12 volts).
from skin will damage the bulb and shorten its life.
3. Push the bulb straight into the receptacle all the way.
4. Place the tabs of the glass cover into the grooves of
For improved lighting inside the oven, clean the glass
cover frequently using a wet cloth. This should be
done when the oven is completely cool.
5. Reconnect electrical power to the oven.
Oven Light
or cloth
Receptacle
G9 Bulb
Socket
Tab
Glass cover
Receptacle
(on some models)
CARE AND CLEANING: