GE PB910DPBB Quick Specs - Page 1
GE PB910DPBB - Profile 30 in. Electric Range Manual
UPC - 084691187547
View all GE PB910DPBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
PB910DP/TP GE Profile™ 30" Free-Standing Electric Range with Warming Drawer Dimensions and Installation Information (in inches) KW Rating 240V 13.7 208V 10.3 Breaker Size 40 Amps† †Note: Check local codes for required breaker size. Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range. Receptacle Locations Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall. Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, highheat, no-load heating element operation. Installation Information: Before installing, consult installation instructions packed with product for current dimensional data. 30 2-1/2 Acceptable electrical outlet area 25 2-1/2 29-7/8 7 14-1/2 A* 25-3/8 47-5/8 7-1/2 On models with baking or warming drawers, electrical outlet must not be in this area. Dimension from wall to front of closed oven door handle is 27-3/8 on models PB750, PB900, PB910, PB920, PB969 and PHB925 and 27-3/4 on models JBP89/84/81. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. *A is 46-7/8 on models JBP89/84/81 and 46-1/2 on models PB750, PB900, PB910, PB920, PB969 and PHB925 All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Listed by Underwriters Laboratories Specification Revised 11/10 221012