Gateway FX530XM 8512162 - Gateway Computer Reference Guide (for Gateway FX-Ser - Page 53
Overclocking the processor
View all Gateway FX530XM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
www.gateway.com Overclocking the processor If your computer comes with an Extreme Edition CPU, the CPU is "unlocked," which means its clock speed (operating speed) can be increased (overclocked) beyond the default processor speed. Overclocking may result in system instability. To change the clock speed of your processor: 1 Turn off your computer and disconnect the power cord. 2 Place your computer on its side with the side accesss panel facing up. 3 Follow the anti-static precautions in "Preventing static electricity discharge" on page 50. 4 Open the side panel and locate the jumper labeled J3C2 BIOS Config on the system board. J3C2 BIOS Config jumper J2B3 jumper (do not adjust) 5 Remove the jumper from its normal position (bridging pins 1-2), then place it in the maintenance boot position (bridging pins 2-3). 6 Reconnect the power cord. 7 Turn on your computer. The BIOS Setup utility opens. 8 Press the arrow keys to select the Performance tab. Press the arrow keys to highlight Set Processor Multiplier, then press ENTER. 9 Press the - (minus) or + (plus) key repeatedly to adjust the multiplier, then press ENTER. 47